CD2056 Valve Fitting - Adaptor 1/4" SAE Male to 5/16" SAE Female Swivel #1827

Item#: 1827 Category

Price: $23.50

C * D Valve Fittings

CD2019 FEMALE 1/4 FLARE SWIVEL

  • Used to Convert any 1/8” MPT Gauge to 1/4 SAE for Quick Testing,  also allows Connection to Core Removal Tool as part of Superheat Testing

CD2038 ADAPTOR 3/8 SAE to 1/4 SAE SWIVEL

  • Allows for Faster Vacuum times by working with Core Removal Tool & allowing Direct Access from Vacuum Pump directly to the system.  Speed-Up Vacuum Times and Reduce Leak Possibility

CD2056 ADAPTOR 1/4 SAE MALE to 5/16 SAE FEMALE SWIVEL

  • Allows Connection of CD2019 to R410A Fittings.  Also converts 1/4 SAE Hoses to 5/16 SAE for R410A use

CD2058 ADAPTOR 1/4 SAE FEMALE to 5/16 SAE MALE with VALVE CORE

  • Used to Adapt Vacuum Pump & Recovery Unit to R410A Manifold

CD2070 CORE DEPRESSOR 1/4 SAE with BACK SEALING VALVE (Coupler attaches to 1/4  Male Flare)

  • Maintains Refrigerant in Gauge Lines, Enables Secure & Safe Connection to 1/4 SAE Fitting (NO Refrigerant Burns)

CD2085 CORE DEPRESSOR 5/16 SAE with Back Sealing Valve (Coupler attaches to 5/16 Male Flare 5/16 Side Fitting)

  • Maintains Refrigerant in Gauge Lines, Enables Secure/Safe Connection to 5/16 SAE Fitting (NO Refrigerant Burns)

CD3815 VALVE CORE TOOL, Heavy Duty with Torque Release

  • The Steel Shaft allows for Removal of most Stubborn Valve Core.  Torque Release Prevents Damage to the Valve Core on Installation by Preventing too much torque being applied to the Valve Core (resulting in less Callbacks due to Leaks or Failure of the Valve Core Seal due to Over Tightening).  Easy to Operate, Insert Tool onto Valve, Tighten until you feel a Click – the Valve is Tightened Perfectly.

CD3917 VALVE CORE REMOVAL KIT

  • Kit comprising a Pick (with Left-hand Thread) to Clean out a Broken Valve Core & a Thread Chaser to Re-tap a Damaged Valve Core Thread.  Saves Time and Money by not having to Replace a Valve Fitting  (works with #CD3930 & #CD3956 Core Removal Tools)

CD3930 BALL VALVE CORE REMOVAL TOOL, for 1/4 Flare Access Fitting (1/4 m. Flare Side Port for Hose/Gauge

CD3956 BALL VALVE CORE REMOVAL TOOL, use on 5/16 Flare Access Fitting ***Use on R410A

  • Removes Leaky Valve Cores using a Core remover with no Refrigerant Loss.  Convenient Side Port allows for Connection of Ancillary Tools including Pressure & Vacuum Gauges.  Easy Superheat measurements using #CD2019 Gauge Adaptor & #CD3975 Superheat Thermometer.   Enables Fast Vacuum by Removing the Valve Core & Vacuuming using #CD2038 3/8 SAE Adaptor.  Remove Damaged Valve Cores & thread Valve Fitting under Pressure using #CD3917 Remover & Rethreader attachments

CD4040 BALL VALVE 1/4 SAE

  • Reliable & easy to Use, the body of the Ball Valve is made using the same materials and design of Core Removal Tools.   Install the Ball Valve on the end of a Service Hose, minimise Refrigerant Loss during Servicing also helps keep Refrigerant Lines Clean & Dry when not in use.  Straight through design maximises Refrigerant Flow, 1/4 turn handle for Easy Open/Close operation.  Core Depressor in Female Coupling fully engages the Valve Core.  #CD4056 is for 5/16 Fittings for R410A

CD5050 & CD5060 CORE DEPRESSOR 1/4 SAE MALE  to FEMALE

  • Ultra miniature 1/4 SAE Male/Female Core depressor for use in Tight Situations

#CD5060 is 5/16SAE Female and 1/4 SAE Male (use with R410A)

CD9601 & CD9602 TEE CONNECTORS

  • Access Tees with Male or Female Side Fittings (Use to Convert a Single Port to Dual or Test Port

 

 

 

 

 

 

 

Out of stock

People also viewed

what our clients say

Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Previous
Next

We are located AT:

113 Mays Road, Onehunga, Auckland 1061

Contact us here

Can’t find what you’re looking for? We can try source it for you! Give us a call on 09 636 5951 now.