EXTREME Ultra Leak Stop for Air Conditioning & Refrigeration Systems #1802

• Permanently Seals Leaks in Air-Conditioning & Refrigeration Systems up to 0.3mm
• Does Not contain Polymers
• Does not React to Air & Humidity
• Gas & Lubricant Friendly

EXTREME ULTRA is a leak stop which represents the Evolution of Extreme, with a higher
effectiveness that has allowed the reduction of the dosage to be used within the plant.
Specifically designed to repair micro leaks in rubber and metal parts of the system,  EXTREME
ULTRA guarantees the toal reparation of leaks up to 0.3mm.  Its mechanical action works in affinity
with the plant materials without giving place to any kind of chemical reaction.

EXTREME ULTRA is polymer free (does not react to oxygen and moisture).  It is suitable for
any type of lubricant and refrigerant gas.   While designing it, particular attention was paid
to new the ecological refrigerant gases R1234yf and R1234ze.

EXTREME ULTRA has been widely tested on many models of compressors to ensure the normal operation
and the absence of damage risk.  Furthermore, it was shown that there was a reduction in noise,
similar evidence was found in the interaction with the recovery station that is neither clogged nor
damaged.

The nature of EXTREME ULTRA particles was thought to be similar to the lubricant and refrigerant
gases.  EXTREME ULTRA does not stop inside the drier filter and does not accumulate in the
expansion valve.

Its action is completed when the system runs again  The required time for definitely solving
the loss depends on its size and shape.

Instructions for Use EXTREME ULTRA in AC/R Systems:

1). Turn the Air Conditioning on and set the
lowest temperature

2). Located the charging port of the A/C system
and connect the cartridge

3). Pump down the Refrigerant in the external
unit

4). Introduce EXTREME ULTRA in the system

5). Re-open the Valve

6). Disconnect the cartridge fron the external
unit

7). Run the A/C System in this condition for at
least 30 minutes