Frame Fix Top Plate Stiffener - Roof Penetration Kit

Item#: FRAMEFIX Categories ,

Price: $25.00

Frame Fix Information

The Pryda Frame Fix has been designed to allow a service hole of no greater than 60mm to be drilled through a top plate (including top plate packer if used) or wall stud to allow services such as air-conditioning or central vacuum pipes to be passed through the member. The fitting of a Pryda Frame Fix re-instates the integrity of the penetrated top plate or stud.

Advantages:

  • Unique design provides greater top plate uplift resistance capacity
  • Quick and easy to install
  • Leaves clean faces to outside edges of the timber frames
  • Fixing is by Type 17 hex head screws. All screw holes shall be filled
  • Comes in one size, designed for use with 90x45mm and 135x45mm timber only
  • Allows an easy solution to fix penetrations in frames made by other trades
  • Timber grade can be SG8 or better

Installation Instructions:

  • Use Type 17 14g x 75mm hex head screws when fixing to top plate with top plate packer
  • Use Type 17 12g x 35mm hex head screws when fixing to single top plate or stud
  • Service hole shall be centred across the timber member and the hole to be a maximum of 60mm diameter
  • Service hole can be made in any position along the top plate or stud provided that the hole edge is no closer than 45mm from a stud or nog/dwang
  • Pryda Frame Fix shall be fitted to the inside of the frame to ensure clean outside faces of the timber
  • All screw holes shall be filled
  • Intended for use in internal ‘closed space’ as per Table 4.1 of NZS3604:2011

People also viewed

what our clients say

Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Warren Hendricks
Read More
Always a pleasure dealing with the team on site. Helpful and friendly service
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Sanjiv Brahmbhatt
Read More
Good customer service. They got good fitting for condensor units.
Previous
Next

We are located AT:

113 Mays Road, Onehunga, Auckland 1061

Contact us here

Can’t find what you’re looking for? We can try source it for you! Give us a call on 09 636 5951 now.