Trade-Seal 50-70mm Building Envelope Penetration Seal #TS5070

* One piece Self Adhesive Collar for
sealing around Pipe & Conduit

* A one component secondary flashing
system

* Can be used on all accepted wall
underlays including bituminous paper

* Can be installed on the inside of
RAB systems & wall underlay’s – retrofit installation

* Requires no adhesives to hold in
place

* Can be left exposed to Weather
& UV for up to 90 days

* Will adhere to mostr clean &
dry substrates including Fibre Cement & Ply RAB Board

* 15 Year Warranty

***Branz Appraisal No. 719 (2011)

INSTALLATION INSTRUCTIONS:

*
Select appropriate diametre TRADE-SEAL – collar should be
tight

* TRADE_SEAL collar extension
should be trimmed to get the best fit

* TRADE-SEAL must not be
forced on to the penetration

* Ensure the surface to
receive the TRADE-SEAL is clean & dry

* Removed backing paper &
slide collar over penetration

* Adhere TRADE-SEAL at 45
Degrees to aid moisture run off

* Smooth TRADE-SEAL onto
substrate to ensure adhesion

* Push TRADE-SEAL collar back
onto penetration to fit cavity width

TRADE SEAL SIZES:

8-12mm

15-22mm

25-32mm

42-55mm

50-70mm

75-90mm

100-110mm

125-135mm

150-165mm

200-220mm